Sub-10-nm-sized Au@AuxIr1-x metal-core/alloy-shell nanoparticles as highly durable catalysts for acidic water splitting.

The absence of efficient and durable catalysts for oxygen evolution reaction (OER) is the main obstacle to hydrogen production through water splitting in an acidic electrolyte. Here, we report a controllable synthesis method of surface IrOx with changing Au/Ir compositions by constructing a range of sub-10-nm-sized core-shell nanocatalysts composed of an Au core and AuxIr1-x alloy shell. In particular, Au@Au0.43Ir0.57 exhibits 4.5 times higher intrinsic OER activity than that of the commercial Ir/C. Synchrotron X-ray-based spectroscopies, electron microscopy and density functional theory calculations revealed a balanced binding of reaction intermediates with enhanced activity. The water-splitting cell using a load of 0.02 mgIr/cm2 of Au@Au0.43Ir0.57 as both anode and cathode can reach 10 mA/cm2 at 1.52 V and maintain activity for at least 194 h, which is better than the cell using the commercial couple Ir/C‖Pt/C (1.63 V, 0.2 h).

Can Lead-Free Double Halide Perovskites Serve as Proper Photovoltaic Absorber?

The emerging Pb-free double perovskites (DPs) are acknowledged as the most potential nontoxic alternatives to lead halide perovskites for thin-film photovoltaics, yet their photophysical properties significantly lag behind expectations. To tackle this issue, it is imperative to conduct a systematic investigation of the structure and optoelectronic properties and to sift through vast chemical space to extract new types of Pb-free DPs with exceptional optoelectronic characteristics and thermal stability. Through high-throughput first-principal calculations, we demonstrate that apart from a select few Pb-free DPs (e.g., Cs2InSbCl6 and Cs2TlBiBr6), other categories, even with suitable direct electronic bandgaps, exhibit inferior optical absorption due to the inversion symmetry-induced parity-forbidden transitions. The mismatch between the electronic and optical bandgap, thence, casts doubt on the reliability of the electronic bandgap as a criterion for Pb-free DPs in various optoelectronics. The assessed limited thermostability under operational conditions, however, hinders any Pb-free DPs from effectively serving as photovoltaic absorbers. Alongside the compositional engineering discussed above, the prospect of manipulating local-site symmetry and disrupting the parity forbidden transitions in stabilized Pb-free DPs through materials engineering should be recognized as a pivotal and rational avenue toward achieving high performance.

Surface-sealing encapsulation of phosphotungstic acid in microporous UiO-66 as a bifunctional catalyst for transfer hydrogenation of levulinic acid to γ-valerolactone.

The efficient production of γ-valerolactone (GVL) from renewable lignocellulose that is synthesized in plants by photosynthesis to replace the declining fossil resources conforms to the principles of circular economy. Compared to direct hydrogenation by H2 molecules, catalytic transfer hydrogenation (CTH) of levulinic acid (LA) and/or its esters to GVL with organic alcohols as a hydrogen source is a much milder route. The synergistic catalysis between Lewis and Brønsted acids is indispensable in the CTH process. Considering that unsaturated coordinated Zr species could act as Lewis acid sites and phosphotungstic acid (PTA) could dissociate protons as Brønsted acid sites, UiO-66 (Zr) was thus "acidified" by encapsulating PTA in its channels to tune the ratio of Brønsted to Lewis acid sites as a bifunctional catalyst so as to better understand the catalytic structure-performance relationship in the CTH process. To address the dilemma of encapsulated PTA that is prone to leach, a rapid surface sealing strategy was adopted to establish a polyimide (PI) coating over the surface of UiO-66 introducing a space confinement effect via an anhydride-amine coupling reaction. The as-synthesized PTA/UiO-66@PI catalyst exhibited 100% of LA conversion, a 93.2% of GVL yield and high recyclability for at least five consecutive cycles. Moreover, a reaction pathway followed by esterification, hydrogenation and dealcoholization as well as a catalytic hydrogenation mechanism based on intermolecular hydride ß-H transfer were proposed. Current work not only provides a high-performance and high-stability catalytic system to selectively produce GVL from LA or its esters, but also sheds light on the catalytic mechanism of the CTH process at the molecular level.

Microenvironment Regulation of the Ti3C2Tx MXene Surface for Enhanced Electrochemical Nitrogen Reduction.

The overwhelmingly competitive hydrogen evolution reaction (HER) is a bottleneck challenge in the electrocatalytic nitrogen reduction reaction (eNRR) process. Herein, we develop a general and effective strategy to suppress the HER via covalent surface functionalization to modulate the local microenvironment of the electrocatalyst. A hydrophobic molecular layer with tunable coverage density was coated on the surface of Ti3C2Tx MXene, and the one with appropriate coverage density significantly improved the eNRR efficiency with an excellent faradaic efficiency (FE) of 38.01% at -0.35 V and a high NH3 yield rate of 17.81 µg h-1mgcat-1 at -0.55 V (vs RHE) in a Na2SO4 solution, which were 3.5-fold in FE and 6.5-fold in NH3 yield rate higher than those of the pristine Ti3C2Tx. Experimental results combined with molecular dynamics (MD) simulations reveal that the hydrophobic molecular layer on the surface greatly limits the proton transfer and benefits higher exposure of active sites with enhanced N2 chemisorption ability, which cumulatively contribute to the boosted eNRR efficiency.

Heterostructured Ru/Ni(OH)2 Nanomaterials as Multifunctional Electrocatalysts for Selective Reforming of Ethanol.

The electrochemical reforming of ethanol into hydrogen and hydrocarbons can reduce the electric potential energy barrier of hydrogen production from electrochemical water splitting, obtaining high value-added anode products. In this work, Ru/Ni(OH)2 heterostructured nanomaterials were synthesized successfully by an in situ reduction strategy with remarkable multifunctional catalytic properties. In the hydrogen evolution reaction, Ru/Ni(OH)2 exhibits a smaller overpotential of 31 mV to obtain a current density of 10 mA/cm2, which is better than that of commercial Pt/C. Notably, such heterostructured Ru/Ni(OH)2 nanomaterials also perform an outstanding catalytic selectivity toward an acetaldehyde product in the oxidation of ethanol. DFT calculations reveal that abundant Ru(0)-Ni(II) heterostructured sites are the key factor for the excellent performances. As a result, an ethanol-selective reforming electrolyzer driven by a 2 V solar cell is constructed to produce hydrogen and acetaldehyde in the cathodic and anodic part, respectively, via using Ru/Ni(OH)2 heterostructured catalysts. This work provides a forward-looking technical guidance for the design of novel energy conversion systems.

Enhanced metal-support interaction between Pd and hierarchical Nb2O5via oxygen defect induction to promote CO oxidative coupling to dimethyl oxalate.

Production of ethylene glycol from coal is a particularly interesting route as it is an economic alternative to the petrochemical-based route. In this process, effectively generating dimethyl oxalate (DMO) is a crucial step by CO oxidative coupling reaction under Pd-based catalysts. However, the aggregation of Pd species over the support is still an issue that relates to the deterioration of catalytic activity and stability. To this end, enhancing the metal-support interaction is urgently required. In this work, hierarchical Nb2O5 (H-Nb2O5) microspheres with abundant oxygen defects were synthesized to anchor the Pd species thus promoting the electron transfer between Pd species and Nb species associated with the generation of interfacial Pd-NbOx sites. Besides, the thinned electron density of Pd species resulting from the electron-withdrawing effect of Nb species is beneficial for activating the adsorbed CO molecules, leading to superior catalytic activity. The Pd/H-Nb2O5 catalyst exhibited 63.1% of CO conversion (theoretical maximum conversion: 64.3%) and 92.9% of DMO selectivity, with a DMO weight time yield of 1297.9 g kgcat.-1 h-1, and remained robust even after 50 h of time on stream evaluation. Current work provides a deep insight into the CO activation mechanism and helps improve the catalytic stability by boosting interfacial electron interaction via oxygen defects induction, and also sheds light on the design and synthesis of high-performance catalysts in other heterogeneous catalysis fields.

Secondary Phosphine Oxide Functionalized Gold Clusters and Their Application in Photoelectrocatalytic Hydrogenation Reactions.

Ligands in ligand-protected metal clusters play a crucial role, not only because of their interaction with the metal core, but also because of the functionality they provide to the cluster. Here, we report the utilization of secondary phosphine oxide (SPO), as a new family of functional ligands, for the preparation of an undecagold cluster Au11-SPO. Different from the commonly used phosphine ligand (i.e., triphenylphosphine, TPP), the SPOs in Au11-SPO work as electron-withdrawing anionic ligands. While coordinating to gold via the phosphorus atom, the SPO ligand keeps its O atom available to act as a nucleophile. Upon photoexcitation, the clusters are found to inject holes into p-type semiconductors (here, bismuth oxide is used as a model), sensitizing the p-type semiconductor in a different way compared to the photosensitization of a n-type semiconductor. Furthermore, the Au11-SPO/Bi2O3 photocathode exhibits a much higher activity toward the hydrogenation of benzaldehyde than a TPP-protected Au11-sensitized Bi2O3 photocathode. Control experiments and density functional theory studies point to the crucial role of the cooperation between gold and the SPO ligands on the selectivity toward the hydrogenation of the C═O group in benzaldehyde.

Boosting Interfacial Electron Transfer between Pd and ZnTi-LDH via Defect Induction for Enhanced Metal-Support Interaction in CO Direct Esterification Reaction.

Strong metal-support interaction is crucial to the stability of catalysts in heterogeneous catalysis. However, reports on boosting interfacial electron transfer between metal and support via defect induction for enhanced metal-support interaction are limited. In this work, ultrathin reducible ZnTi-layered double hydroxide (LDH) nanosheets with rich oxygen defects were synthesized to stabilize Pd clusters, and the rich oxygen defects promoted Pd cluster bonding with Zn and Ti atoms in supports, thereby forming a metal-metal bond. Electron spin resonance (ESR), X-ray absorption fine spectra (XAFS), and density functional theory (DFT) calculations demonstrate remarkable interfacial electron transfer (0.62 e). The Pd/ZnTi-LDH catalyst shows superior catalytic stability for CO direct esterification to dimethyl oxalate. By contrast, the nonreducible Pd/ZnAl-LDH catalyst with a few oxygen defects shows minimal interfacial electron transfer (0.08 e), which leads to relatively poor catalytic stability. This work provides a deep insight into promoting the stability of catalysts by boosting interfacial electron transfer via defect induction.

Significantly Enhanced Overall Water Splitting Performance by Partial Oxidation of Ir through Au Modification in Core-Shell Alloy Structure.

Developing efficient bifunctional electrocatalysts for overall water splitting in acidic conditions is the essential step for proton exchange membrane water electrolyzers (PEMWEs). We first report the synthesis of core-shell structure nanoparticles (NPs) with an Au core and an AuIr2 alloy shell (Au@AuIr2). Au@AuIr2 displayed 4.6 (5.6) times higher intrinsic (mass) activity toward the oxygen evolution reaction (OER) than a commercial Ir catalyst. Furthermore, it showed hydrogen evolution reaction (HER) catalytic properties comparable to those of commercial Pt/C. Significantly, when Au@AuIr2 was used as both the anode and cathode catalyst, the overall water splitting cell achieved 10 mA/cm2 with a low cell voltage of 1.55 V and maintained this activity for more than 40 h, which greatly outperformed the commercial couples (Ir/C||Pt/C, 1.63 V, activity decreased within minutes) and is among the most efficient bifunctional catalysts reported. Theoretical calculations coupled with X-ray-based structural analyses suggest that partially oxidized surfaces originating from the electronic interaction between Au and Ir provide a balance for different intermediates binding and realize significantly enhanced OER performance.

Highly Efficient and Selective N-Formylation of Amines with CO2 and H2 Catalyzed by Porous Organometallic Polymers.

The valorization of carbon dioxide (CO2 ) to fine chemicals is one of the most promising approaches for CO2 capture and utilization. Herein we demonstrated a series of porous organometallic polymers could be employed as highly efficient and recyclable catalysts for this purpose. Synergetic effects of specific surface area, iridium content, and CO2 adsorption capability are crucial to achieve excellent selectivity and yields towards N-formylation of diverse amines with CO2 and H2 under mild reaction conditions even at 20 ppm catalyst loading. Density functional theory calculations revealed not only a redox-neutral catalytic pathway but also a new plausible mechanism with the incorporation of the key intermediate formic acid via a proton-relay process. Remarkably, a record turnover number (TON=1.58×106 ) was achieved in the synthesis of N,N-dimethylformamide (DMF), and the solid catalysts can be reused up to 12 runs, highlighting their practical potential in industry.

Theoretical Insight into the Structural Nonplanarity in Aromatic Fused-Ring Metallabenzenes.

Metalla-aromatics have attracted considerable attention due to their fascinating structural and reactive properties as well as their potential as prospective functional materials. Metallabenzenes and their fused-ring counterparts are significant members of metalla-aromatics, while their crystal structures often display seemly counterintuitive nonplanar geometry. The geometric bending of metallabenzenes has been attributed to the unfavorable antibonding interactions in the σ-space orbitals rather than the general opinion regarding the π-space orbitals of an aromatic compound. However, the origin of the geometric bending in fused-ring metallabenzenes remains elusive. In this work, we elucidated that such a "σ-control mechanism" still holds for fused-ring metallabenzenes by performing systematic calculations for a plethora of metallabenzenes and fused-ring metallabenzenes. Furthermore, we found that a more bent geometry can be achieved for fused-ring metallabenzenes than their corresponding metallabenzenes by fusing the aromatic rings at the ortho-position of a metal center to induce extra repulsion. The more significant bending in fused-ring metallabenzenes also favors the aromaticity enhancement. These findings not only provide mechanistic insight into the unexpected geometric distortion in both metallabenzenes and fused-ring metallabenzenes but also pave the way to design and develop bent metalla-aromatics with enhanced metalla-aromaticity, which hold great potential as aromatic functional materials.

Zn2+ stabilized Pd clusters with enhanced covalent metal-support interaction via the formation of Pd-Zn bonds to promote catalytic thermal stability.

Pd-Based heterogeneous catalysts have been demonstrated to be efficient in numerous heterogeneous reactions. However, the effect of the support resulting in covalent metal-support interaction (CMSI) has not been researched sufficiently. In this work, a Lewis base is modulated over MgAl-LDH to investigate the support effects and it is further loaded with Pd clusters to research the metal-support interactions. MgAl-LDH with ultra-low Pd loading (0.0779%) shows CO conversion (55.0%) and dimethyl oxalate (DMO) selectivity (93.7%) for CO oxidative coupling to DMO, which was gradually deactivated after evaluation for 20 h. To promote the stability of Pd/MgAl-LDH, Zn2+ ions were introduced into the MgAl-LDH support to strengthen the CMSI by forming Pd-Zn bonds, which further increased the adsorption energy of the Pd clusters on ZnMgAl-LDH, and this was verified by X-ray absorption fine structure (XAFS) measurements and density functional theory (DFT) calculations. The stability of the Pd/ZnMgAl-LDH catalyst could be maintained for at least 100 h. This work highlights that covalent metal-support interactions can be strengthened by forming new metal-metal bonds, which could be extended to other systems for the stabilization of noble metals over supports.

Selective Catalytic Dehydrogenative Oxidation of Bio-Polyols to Lactic Acid.

The global demand for lactic acid (LA) is increasing due to its successful application as monomer for the manufacture of bioplastics. Although N-heterocyclic carbene (NHC) iridium complexes are promising molecular catalysts for LA synthesis, their instabilities have hindered their utilization especially in commercial applications. Here, we report that a porous self-supported NHC-iridium coordination polymer can efficiently prevent the clusterization of corresponding NHC-Ir molecules and can function as a solid molecular recyclable catalyst for dehydrogenation of bio-polyols to form LA with excellent activity (97 %) and selectivity (>99 %). A turnover number of up to 5700 could be achieved in a single batch, due to the synergistic participation of the Ba2+ and hydroxide ions, as well as the blockage of unwanted pathways by adding methanol. Our findings demonstrate a potential route for the industrial production of LA from cheap and abundant bio-polyols, including sorbitol.

Iridium-Catalyzed Selective Cross-Coupling of Ethylene Glycol and Methanol to Lactic Acid.

An atom-economic approach that has an unprecedented high selectivity for the synthesis of lactic acid (LA) based on a catalytic dehydrogenative cross-coupling by using inexpensive bulk ethylene glycol and methanol is described. This method relies on the synthesis and utilization of a novel iridium catalyst bearing three N-heterocyclic carbenes derived from 1,3-dimethylbenzimidazolium salts, and exhibits outstanding activity in the production of LA [turnover frequency (TOF) up to 3660 h-1 ] owing to an elegant metal-ligand cooperation.

Ultrathin Ni(0)-Embedded Ni(OH)2 Heterostructured Nanosheets with Enhanced Electrochemical Overall Water Splitting.

The efficiency of splitting water into hydrogen and oxygen is highly dependent on the catalyst used. Herein, ultrathin Ni(0)-embedded Ni(OH)2 heterostructured nanosheets, referred to as Ni/Ni(OH)2 nanosheets, with superior water splitting activity are synthesized by a partial reduction strategy. This synthetic strategy confers the heterostructured Ni/Ni(OH)2 nanosheets with abundant Ni(0)-Ni(II) active interfaces for hydrogen evolution reaction (HER) and Ni(II) defects as transitional active sites for oxygen evolution reaction (OER). The obtained Ni/Ni(OH)2 nanosheets exhibit noble metal-like electrocatalytic activities toward overall water splitting in alkaline condition, to offer 10 mA cm-2 in HER and OER, the required overpotentials are only 77 and 270 mV, respectively. Based on such an outstanding activity, a water splitting electrolysis cell using the Ni/Ni(OH)2 nanosheets as the cathode and anode electrocatalysts has been successfully built. When the output voltage of the electrolytic cell is 1.59 V, a current density of 10 mA cm-2 can be obtained. Moreover, the durability of Ni/Ni(OH)2 nanosheets in the alkaline electrolyte is much better than that of noble metals. No obvious performance decay is observed after 20 h of catalysis. This facile strategy paves the way for designing highly active non-precious-metal catalyst to generate both hydrogen and oxygen by electrolyzing water at room temperature.

Iodide-enhanced palladium catalysis via formation of iodide-bridged binuclear palladium complex.

The prevalence of metalloenzymes with multinuclear metal complexes in their active sites inspires chemists' interest in the development of multinuclear catalysts. Studies in this area commonly focus on binuclear catalysts containing either metal-metal bond or electronically discrete, conformationally advantageous metal centres connected by multidentate ligands, while in many multinuclear metalloenzymes the metal centres are bridged through µ2-ligands without a metal-metal bond. We report herein a µ2-iodide-bridged binuclear palladium catalyst which accelerates the C-H nitrosation/annulation reaction and significantly enhances its yield compared with palladium acetate catalyst. The superior activity of this binuclear palladium catalyst is attributed to the trans effect-relay through the iodide bridge from one palladium sphere to the other palladium sphere, which facilitates dissociation of the stable six-membered chelating ring in palladium intermediate and accelerates the catalytic cycle. Such a trans effect-relay represents a bimetallic cooperation mode and may open an avenue to design and develop multinuclear catalysts.

Ag10 Ti28 -Oxo Cluster Containing Single-Atom Silver Sites: Atomic Structure and Synergistic Electronic Properties.

Supported single-atom catalysts have been emerging as promising materials in a variety of energy catalysis applications. However, studying the role of metal-support interactions at the molecular level remains a major challenge, primarily due to the lack of precise atomic structures. In this work, by replacing the frequently used TiO2 support with its molecular analogue, titanium-oxo cluster (TOC), we successfully produced a new kind of Ti-O material doped with single silver sites. The as-obtained Ag10 Ti28 cluster, containing four exposed and six embedded Ag sites, is the largest noble-metal-doped Ti-O cluster reported to date. Density functional theory (DFT) calculations show that the Ag10 Ti28 core exhibits properties distinct from those of metallic Ag-based materials. This Ti-O material doped with single Ag sites presents a high ϵd and moderate CO binding capacity comparable to that of metallic Cu-based catalysts, suggesting that it might display different catalytic performance from the common Ag-based catalysts, for example, for CO2 reduction. These results prove that the synergism of active surface metal atoms and the Ti-O cluster support result in unique physical properties, which might open a new direction for single-atom-included catalysts.

Enhanced QM/MM sampling for free energy calculation of chemical reactions: A case study of double proton transfer.

Free energy calculations for chemical reactions with a steep energy barrier require well defined reaction coordinates (RCs). However, when multiple parallel channels exist along selected RC, the application of conventional enhanced samplings is difficult to generate correct sampling within limited simulation time and thus cannot give correct prediction about the favorable pathways, the relative stability of multiple products or intermediates. Here, we implement the selective integrated tempering sampling (SITS) method with quantum mechanical and molecular mechanical (QM/MM) potential to investigate the chemical reactions in solution. The combined SITS-QM/MM scheme is used to identify possible reaction paths, intermediate and product states, and the free energy profiles for the different reaction paths. Two double proton transfer reactions were studied to validate the implemented method and simulation protocol, from which the independent and correlated proton transfer processes are identified in two representative systems, respectively. This protocol can be generalized to various kinds of chemical reactions for both academic studies and industry applications, such as in exploration and optimization of potential reactions in DNA encoded compound library and halogen or deuterium substitution of the hit discovery and lead optimization stages of drug design via providing a better understanding of the reaction mechanism along the designed chemical reaction pathways.

Differentiation between enamines and tautomerizable imines in the oxidation reaction with TEMPO.

Enamine and imine represent two of the most common reaction intermediates in syntheses, and the imine intermediates containing α-hydrogen often exhibit the similar reactivity to enamines due to their rapid tautomerization to enamine tautomers. Herein, we report that the minor structural difference between the enamine and the enamine tautomer derived from imine tautomerization results in the different chemo- and regioselectivity in the reaction of cyclohexanones, amines and TEMPO: the reaction of primary amines furnishes the formal oxygen 1,2-migration product, α-amino-enones, while the reaction of secondary amines under similar conditions generates exclusively arylamines via consecutive dehydrogenation on the cyclohexyl rings. The 18O-labeling experiment for α-amino-enone formation revealed that TEMPO served as oxygen transfer reagent. Experimental and computational studies of reaction mechanisms revealed that the difference in chemo- and regioselectivity could be ascribed to the flexible imine-enamine tautomerization of the imine intermediate containing an α-hydrogen.

Rational designing of 8-hydroxyquinolin-imidazolinone-based fluorescent protein mutants with dramatically red shifted emission: A computational study.

Engineering fluorescent proteins to be the customized in vivo labels for monitoring cellular dynamic events is critical in biochemical and biomedical studies. The design and development of novel red fluorescent proteins is one of the most important fronts in this field due to their potential of imaging the entire organism. A recent fluorescent protein mutant eqFP650-67-HqAla with the 8-hydroxyquinolin-imidazolinone (HQI) chromophore has the plausible bathochromic shift of ~30 nm in its emission spectrum wavelength comparing to the parent fluorescent protein eqFP650. However, molecular mechanism of this significant shift remains somewhat obscure. In this study, we carefully benchmarked our computational methods and performed extensive calculations to investigate various structural components' effect on the chromophore's emission energy and decipher the molecular origin of the spectral shift. The influences of conjugation size, substituent group, substituent site as well as the number of substituents have been examined by elaborately designed chromophore derivatives. Accordingly, we proposed several chromophore mutants with dramatic bathochromic shift of up to ~60 nm in their emission spectra. We further evaluated their structural stability in the protein using molecular dynamics simulations. Present theoretical study connects the structural feature of chromophore derivatives in red fluorescent proteins with their splendid performances in shifting the emission frequency and offer the molecular insight. The computational protocol and successive examination procedure to extract the structural effect utilized herein can also be widely applied to other fluorescent proteins in general. © 2018 Wiley Periodicals, Inc.